Futaba GY520 User Manual download pdf (Page 31)

ETTING THE

AIN

Most modern computer transmitters will have a gyro function

built into them. If this is the case, please refer to your transmitter’s

instruction manual. Most modern gyro functions will allow you to

set the mode of operation and the gains for several ﬂ ight conditions.

The use of these functions is strongly encouraged. Shown below is a

recommendation of settings:

If your transmitter does not

have a Gyro function built

in then it will be necessary

to use the ATV or EPA function to control the gain. The Gyro Gain

channel will generally be assigned to a switch which provides two

gain values. Simply set the ATV or EPA for the gyro channel to the

desired gain value and set the Gain Switch to the desired mode of

operation. Unfortunately since you will only have one gain value

available it will be necessary to use the lowest value needed (for

example Idleup 2). When using this method of controlling the

gain, one direction of the switch will be AVCS mode and the other

direction of the switch will be Normal mode. Always ensure the gyro

switch is set to the desired mode before ﬂ ying. Do not accidentally

change the gyro switch in ﬂ ight.

Recommended Gyro

Function Settings:

Switch: Condition

Type: GY or AVCS

Gain Values

Normal: 70% A (AVCS)

Idleup 1: 40% A (AVCS)

Idleup 2: 40% A (AVCS)

Hold: 70% A (AVCS)

2-Position

Switch

Gyro Mode

NORMAL AVCS

70% 70%

Gain Channel

ATV or EPA

GAIN %

+100% Neutral

-100%

50%

100%

Normal Side

AVCS Side

Y520 Mnl.indd 31Y520 Mnl.indd 31 4/7/2009 7:55:08 AM4/7/2009 7:55:08 AM

1 2 ... 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Futaba GY520 User Manual Page 31

Comments to this Manuals

Related products and manuals for Measuring instruments Futaba GY520