Futaba 9VHP User Manual download pdf (Page 21)

Auto Dual Rate

• Dual Rate functions may be switched ON and

OFF automatically, according to the Throttle

(CH3) control stick position.

1) Move the cursor to the "mode" position with

the or cursor key.

2 Use the or cursor key to select the

D/R function to be set to AUTO and press the

program key.

3) Use the and

cursor keys to move

the cursor to "pos".

Set the Throttle stick at the point you wish

ON/OFF switching to occur, and press the

program key.

OFF Switch is set to OFF, Dual Rate will be

OFF.

• If the assigned D/R ON/OFF Switch is set

ON, then D/R

will

even

the

Throttle stick is still below the ON/OFF

point.

6) When the Throttle stick is moved above the

ON/OFF point, then D/R will be ON, regard-

less of the position of the D/R ON/OFF

Switch.

NOTE: Dual Rate ON/OFF Switch directions

can be reversed using the PARAMETER program

screen (See D/R SW DIR page 46).

5) When the Throttle stick is below the ON/OFF

switching point and the pertinent D/R ON/

In the example shown, the AIL Dual Rate function will be switched to D/R ON (Low Rate) when the

Throttle stick is moved above the 10% positon. AIL and RUD D/R functions are both set to Switch No. 3.

End Soft Key

Press the program key to return to the EDIT screen.

[19]

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Futaba 9VHP User Manual Page 21