Futaba 14MZ User Manual download pdf (Page 127)

Operation modes

The operation modes when stick, trim lever or VR are selected are described below. Change the

operation mode by touching the Mode and Type buttons.

Linear hysteresis mode

This setting method selects function ON/OFF

based on the set point. Hysteresis (dead band) can

be set between ON and OFF. The ON and OFF

positions can be reversed with the Reverse button.

Symmetrical hysteresis mode

Operation is the same as the linear hysteresis

mode, but left and right (up and down) operations

are symmetrical about the neutral position. For

example, when you want to switch DR1 with the

aileron stick, when the stick is moved to the left or

right, DR1 can be turned ON at the same left and

right position.

Linear box mode

This mode turns on the switch within a range of

2 points. Each point can be set. The ON and OFF

positions can be reversed with the Reverse switch.

Symmetrical box mode

Operation is the same as the linear box mode,

but left and right (up and down) operation is

symmetrical about the neutral position.

When shifting the ON/OFF point

The ON/OFF and hysteresis (dead band)

boundary point (there are 2 points: top and

bottom) position can be shifted. ON/OFF is

possible at a free position.

[Setting method]

1. Select the top and bottom boundary points

with the [Point] button.

2. Move the stick, etc. to the point you want

to shift and touch the [Enter] button. The

boundary points change.

*Also shift other points, as required.

Top point Bottom point

127

<Data>

1 2 ... 122 123 124 125 126 127

No comments

Futaba 14MZ User Manual Page 127