Futaba 3VCS User Manual download pdf (Page 22)

Before Using

MEMORY MODULE

INITIALIZE ?

YES > +

NO > -

When inserting and removing the data pack

Always turn off the transmitter power before removing or inserting the data pack.

Data pack initialization

When using the data pack, initialization is necessary so

that the data pack can be used with this transmitter. When

"INITIALIZE?" is displayed on the screen at power ON,

press the (+) button. This automatically initializes the data

pack. No further action is necessary.

When a data pack used with another model has been inserted, and initialization is

executed by pressing the (+) button when "INITIALIZE?" is displayed on the screen

at power ON, the old data is destroyed so the data pack can be used with the 3VCS.

Data interchangeability with other models

Data is not interchangeable with 3PK, 3VC, and other transmitters other than the

3VCS.

Set data backup

The set data of each function (transmitter body and data pack) of the 3VCS transmit-

ter is stored in a memory element that does not require a backup battery. Therefore,

the 3VCS transmitter can be used without paying attention to the backup battery life.

Display switch

If the display switch is turned on without turning on the power switch, transmitter

side data setup is possible without emitting radio waves.

Display switch

OFF

Warning

Never turn on the power switch while

this function is in use.

If the power switch is turned on, radio waves will be

emitted and interfere with

vehicles (boats) operating on the same band (fre-

quency) and is very dangerous.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 111 112

No comments

Futaba 3VCS User Manual Page 22