Futaba 8SGAP User Manual download pdf (Page 21)

CHANNEL SELECT SWITCH

• This switch 48 selects the channel when setting

FS and HOLD functions. It also acts as the chan-

nel select switch for SERVO TEST function.

When switch 49 is set to RESET, the Channel

Select switch is used to designate the function

(ATV, FS, BFS memory, or ALL) to be cleared

by Buttons 46 and 47 . Note that the positions

on switch 48 have a different meaning when

the Function Select Switch is set on RESET.

This is summarized in the table below:

Channel select switch

Fig.

32

[48 Relationship among channel select switch

number, servo and reset.

No.

1.

2.

3.

4.

5.

6.

7.

8.

RESET &

TEST ALL

OFF

At switch [49] FS SELECT,

ATV, TESTA.B

Aileron

Elevator

Throttle

Rudder

Channel 5 switch (landing

gear)

Flaps

Channel 7 knob (spoiler)

Channel 8 lever (variable

pitch)

All the servos are

operated at servo

test.

Usually set to this OFF position.

A t switch [49]

RESET

FS (fail safe)

ATV

BFS memory

FS,

ATV,

and

BFS

memory are reset

simultaneously.

FUNCTION SELECT SWITCH

•This

switch

selects

the

function

to

be

set

(ATV,

FS, BFS memory) or test (A or B) to be per-

formed. It is also used in the RESET position to

clear ATV, FS, and BFS memory (in conjunction

with 46, 47, and 48). Note: In RESET posi-

tion, the Channel Select Switch 48 is used to

designate the function(s) to be cleared.

Function select switch

Fig.

33

• Normally set it to OFF.

FS

ALL

Switch to this position when setting fail safe

for all channels, FS is described in the "HOW

TO USE FS" section.

FS SELECT

This position allows setting of fail safe and

hold as described in the "HOW TO USE

FS" section.

ATV

This position allows setting ATV as describ-

ed in the "HOW TO USE ATV" section.

TEST A

This position allows

servo test A as described

in the

"SERVO TEST" section.

TEST B

This position allows servo test B as described

in the "SERVO TEST" section.

BFS MEMO SET

Switch to this position when setting the BFS

release

point

as

described

in the "BATTERY

FS MEMORY SETTING" section.

OFF

Normally set to this position.

PCM GREEN CHARACTER

NAMEPLATE AND RED

CHARACTER NAMEPLATE RC

SET COMPATIBILITY

When a red character nameplate transmitter and

a green character nameplate receiver are used as

a pair, only the 2 FS SELECT function of the

FUNCTION SELECT switch described above is

operative. In this case, switch is set to I FS

ALL and the receiver mode selector switch Is

set to FS. The fail safe function is ON for all

channels.

(When using the hold mode, set the receiver

mode selector switch to HOLD.)

When a green character nameplate transmitter

and red character nameplate receiver are used

as a pair, all the function of the transmitter are

operative.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Comments to this Manuals

No comments